GrabBag/GrabBagPrj/project_pkg_service.sh

#!/bin/bash

# 服务打包

SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
source "${SCRIPT_DIR}/project_pkg_common.sh"

write_service_postinst() {
    cat > "${PKG_PATH}/DEBIAN/postinst" <<EOF
#!/bin/bash
set -e

SERVICE_SOURCE="${SERVICE_INSTALL_PATH}"
SERVICE_UNIT="${SERVICE_UNIT_NAME}"
SERVICE_TARGET="/etc/systemd/system/\${SERVICE_UNIT}"
LD_CONF_FILE="/etc/ld.so.conf.d/${PACKAGE_SLUG}.conf"
PKG_NAME="${PACKAGE_NAME}"
PKG_VERSION="${PKG_RELEASE_VERSION}"
INSTALL_DIR="${SERVICE_INSTALL_DIR}"

log()  { echo "[\${PKG_NAME}] \$*"; }
fail() { echo "[\${PKG_NAME}] [FAIL] \$*" >&2; exit 1; }

log "=========================================="
log "开始安装 \${PKG_NAME} \${PKG_VERSION}"
log "  安装目录: \${INSTALL_DIR}"
log "  服务单元: \${SERVICE_UNIT}"
log "=========================================="

# 1. 配置动态库搜索路径
log "[1/6] 配置动态库搜索路径 \${LD_CONF_FILE}"
cat > "\${LD_CONF_FILE}" <<'LDEOF'
/usr/lib
/opt/sysroot/lib/
LDEOF
ldconfig
log "      ldconfig 完成"

# 2. DroneScrewServer 专用：启动 mediamtx
if [ "\${PKG_NAME}" = "DroneScrewServer" ]; then
    mkdir -p "\${INSTALL_DIR}/logs"
    log "[2/6] 检测并启动 mediamtx RTSP 服务器"
    MEDIAMTX_BIN="\${INSTALL_DIR}/bin/mediamtx"
    MEDIAMTX_CFG="\${INSTALL_DIR}/etc/mediamtx_dronescrew.yml"
    MEDIAMTX_SERVICE="\${INSTALL_DIR}/etc/mediamtx-dronescrew.service"

    if [ -f "\${MEDIAMTX_BIN}" ] && [ -f "\${MEDIAMTX_CFG}" ] && [ -f "\${MEDIAMTX_SERVICE}" ]; then
        chmod +x "\${MEDIAMTX_BIN}"

        # 复制 service 文件到 systemd 目录
        cp "\${MEDIAMTX_SERVICE}" /etc/systemd/system/mediamtx-dronescrew.service
        chmod 644 /etc/systemd/system/mediamtx-dronescrew.service

        systemctl daemon-reload
        systemctl enable mediamtx-dronescrew.service >/dev/null 2>&1 || true
        systemctl restart mediamtx-dronescrew.service
        sleep 1

        if systemctl is-active --quiet mediamtx-dronescrew.service; then
            log "      [OK] mediamtx 已启动 (端口 8554)"
        else
            log "      [WARN] mediamtx 启动失败，DroneScrewServer RTSP 推流可能不可用"
            log "      手动检查: journalctl -u mediamtx-dronescrew.service -n 20"
        fi
    else
        log "      [WARN] mediamtx 文件缺失，跳过启动"
    fi
else
    log "[2/6] 跳过 mediamtx（非 DroneScrewServer）"
fi

# 3. 校验服务文件
log "[3/6] 校验服务文件"
[ -f "\${SERVICE_SOURCE}" ] || fail "缺少服务文件: \${SERVICE_SOURCE}"
log "      OK: \${SERVICE_SOURCE}"

# 4. 停止/禁用旧服务
log "[4/6] 停止旧服务（如在运行）"
if systemctl is-active --quiet "\${SERVICE_UNIT}" 2>/dev/null; then
    systemctl stop "\${SERVICE_UNIT}"
    log "      已停止 \${SERVICE_UNIT}"
else
    log "      旧服务未运行，跳过"
fi
if systemctl is-enabled --quiet "\${SERVICE_UNIT}" 2>/dev/null; then
    systemctl disable "\${SERVICE_UNIT}" >/dev/null 2>&1 || true
    log "      已禁用旧 unit"
fi

# 5. 注册新 unit
log "[5/6] 注册并启用新 unit"
cp "\${SERVICE_SOURCE}" "\${SERVICE_TARGET}"
chmod 644 "\${SERVICE_TARGET}"
systemctl daemon-reload
systemctl enable "\${SERVICE_UNIT}" >/dev/null 2>&1
log "      已 enable \${SERVICE_UNIT}"

# 6. 启动并验证
log "[6/6] 启动服务"
set +e
systemctl start "\${SERVICE_UNIT}"
START_RC=\$?
set -e
sleep 1

if systemctl is-active --quiet "\${SERVICE_UNIT}"; then
    log "      [OK] \${SERVICE_UNIT} 已在运行"
    systemctl status "\${SERVICE_UNIT}" --no-pager --lines=3 || true
    log "=========================================="
    log "\${PKG_NAME} 安装成功"
    log "  查看实时日志: journalctl -u \${SERVICE_UNIT} -f"
    log "  停止服务:     systemctl stop \${SERVICE_UNIT}"
    if [ "\${PKG_NAME}" = "DroneScrewServer" ]; then
        log "  mediamtx 日志: journalctl -u mediamtx-dronescrew.service -f"
        log "  RTSP 拉流地址: rtsp://<板子IP>:8554/live/dronescrew"
    fi
    log "=========================================="
else
    log "      [FAIL] \${SERVICE_UNIT} 未能启动 (start rc=\${START_RC})"
    log "      最近 20 行日志:"
    journalctl -u "\${SERVICE_UNIT}" --no-pager --lines=20 || true
    fail "服务启动失败，请检查上面的日志"
fi
EOF

    chmod +x "${PKG_PATH}/DEBIAN/postinst"
}

write_service_postrm() {
    cat > "${PKG_PATH}/DEBIAN/postrm" <<EOF
#!/bin/bash
set -e

SERVICE_UNIT="${SERVICE_UNIT_NAME}"
LD_CONF_FILE="/etc/ld.so.conf.d/${PACKAGE_SLUG}.conf"
PKG_NAME="${PACKAGE_NAME}"
INSTALL_DIR="${SERVICE_INSTALL_DIR}"
ACTION="\${1:-}"

log() { echo "[\${PKG_NAME}] \$*"; }

log "=========================================="
log "卸载 \${PKG_NAME}  (动作: \${ACTION})"
log "=========================================="

log "[1/4] 停止并禁用 \${SERVICE_UNIT}"
systemctl stop "\${SERVICE_UNIT}" 2>/dev/null && log "      已停止" || log "      未在运行"
systemctl disable "\${SERVICE_UNIT}" >/dev/null 2>&1 && log "      已禁用" || true
rm -f "/etc/systemd/system/\${SERVICE_UNIT}"
systemctl daemon-reload

# DroneScrewServer 专用：停止 mediamtx
if [ "\${PKG_NAME}" = "DroneScrewServer" ]; then
    log "[2/4] 停止并删除 mediamtx 服务"
    if systemctl is-active --quiet mediamtx-dronescrew.service 2>/dev/null; then
        systemctl stop mediamtx-dronescrew.service
        log "      已停止 mediamtx"
    fi
    systemctl disable mediamtx-dronescrew.service >/dev/null 2>&1 || true
    rm -f /etc/systemd/system/mediamtx-dronescrew.service
    systemctl daemon-reload
    log "      mediamtx 服务已移除"
else
    log "[2/4] 跳过 mediamtx（非 DroneScrewServer）"
fi

if [ "\${ACTION}" = "remove" ] || [ "\${ACTION}" = "purge" ]; then
    log "[3/4] 清理安装目录 \${INSTALL_DIR}"
    rm -rf "\${INSTALL_DIR}"
    log "[4/4] 清理 ld.so.conf 并刷新缓存"
    rm -f "\${LD_CONF_FILE}"
    ldconfig
    log "=========================================="
    log "\${PKG_NAME} 卸载完成"
    log "=========================================="
else
    log "[3/4] 跳过目录清理（仅升级阶段，保留安装目录）"
    log "[4/4] 跳过 ld.so.conf 清理"
fi
EOF

    chmod +x "${PKG_PATH}/DEBIAN/postrm"
}

# ===== 主流程 =====
load_package_context "$@" "service"
run_common_packaging_steps
log_info "写入服务集成脚本"
write_service_postinst
write_service_postrm
finalize_package