59 lines
2.6 KiB
Markdown
59 lines
2.6 KiB
Markdown
# 1.2.6
|
||
## build_1-5 2026-11-05
|
||
1. A321 A319按照A320处理， 协议同步更新，匹配就显示软件页面显示的，不匹配就显示检测的
|
||
2. 急停开机配置失败优化
|
||
3. debug功能存储
|
||
|
||
# 1.2.5
|
||
## build_1 2026-01-02
|
||
1. 止后到OK还继续检测，到OK后才停止检测
|
||
|
||
# 1.2.4
|
||
## build_1 2026-09-19
|
||
1. 雷达数据允许2%丢帧; 平面相机5分钟调整一次曝光，增加了发包间隔
|
||
|
||
# 1.2.2
|
||
## build_1 2026-09-15
|
||
1. 增加自动曝光的区域配置
|
||
2. 设备离线后统一进入 22 ERROR 状态
|
||
|
||
# 1.2.1
|
||
## build_1~5 2026-09-15
|
||
1. 逻辑修改，增加系统状态协议
|
||
|
||
# 1.2.0
|
||
## build_1
|
||
1. 开机和启动前自检雷达、相机、存储、网络；失败则进入 22 ERROR，错误码 2201–2204，多项失败为 2200。
|
||
2. 停稳后保持 STOP 并持续检测实际位置；正常停稳确认期间对外保持 STOP，检测到越位时发布越位状态并清零停稳计时，仍处于停止范围且持续停稳满配置 `okHoldMs`（默认 5 秒）后进入 9 / OK。
|
||
3. 人员 ROI 检测和人工上/下轮挡时间分别保存并写入 MariaDB。
|
||
4. 可配置 20 种机型；识别校验仍只针对 A320/B737。
|
||
5. PAD 单密码登录、维护模式、历史会话回放；运行期间记录库异常不阻塞引导。
|
||
6. ARM 实时部署开机初始化先等待急停 GPIO 输入可用，再等待已启用的 MariaDB 连接成功；等待可由关闭应用中断。
|
||
|
||
# 1.1.1
|
||
## build_1
|
||
1. 优化流程逻辑，在比较远处报slow（14）
|
||
2. Updated the AAPGS integration to the three-class A320/B737/other model package and runtime ABI 5.
|
||
3. Added the Other aircraft option to the App and remote View.
|
||
|
||
# 1.1.0
|
||
## build_1
|
||
1. 增加实时视频流
|
||
|
||
# 0.1.1 2026-07-21
|
||
|
||
1. Added stop-position wheel-chocking workflow with configurable person ROI detection and `21 / CHOCK ON` completion state.
|
||
2. Updated AAPGS integration and ARM packaging for the YOLO detection runtime ABI 4 / SONAME 3 model package.
|
||
## build_1
|
||
1. Updated the LED presentation workflow to the 0720 specification.
|
||
2. Added mandatory A320/B737 selection before starting parking guidance.
|
||
3. Reset the selected aircraft model when a guidance session ends and returns to idle.
|
||
|
||
# 0.1.0 2026-07-06
|
||
## build_1
|
||
1. Initial ParkingSpaceGuide application scaffold.
|
||
2. Copied the existing pose UI layout and replaced business logic with parking-space guide workflow.
|
||
3. Reserved algorithm interface.
|
||
4. Integrated MvsDevice, RsLidarDevice, and LED ModbusTCP output configuration.
|
||
5. Added editable algorithm/device parameters and ARM build/package entries.
|